Bently Nevada 3500-22M Transient data interface module

The Bently Nevada 3500/22M Transient Data interface module is a key component in industrial monitoring and control systems for the acquisition and processing of transient data. Here are the details and features of the module:

Product Overview:

Manufacturer: Bently Nevada

Model: 3500/22M

Type: Transient Data Interface Module (TDI)

Main features:

High-speed sampling: The module has a high sampling rate and is able to capture and record short transient events, such as the shock of mechanical vibration, instantaneous current or voltage changes in the power system.

Data storage: The module has a data storage function, which can record transient data and transmit it to the monitoring system or data analysis tool for subsequent processing and analysis.

Safety isolation: In order to ensure the isolation between the input signal and the output signal and prevent power interference from affecting the accuracy of the measurement and control signal, the module has a safety isolation function.

Interface compatibility: The module is used as an interface to software compatible with the 3500 monitoring system, especially with the 3500 system configuration software and the System 1 status monitoring and diagnostic software.

Technical specifications:

Input signal: -10 Vdc to +10 Vdc

Power consumption: 7.7 Watts

Shaft and sensor power supplies: -24 Vdc

Operating temperature: about 25 degrees Celsius under standard environment

Weight: 0.85 pounds

Function description:

Data collection: Connected to M-series monitors (e.g. 3500/40M, 3500/42M, etc.) for continuous collection of steady-state and transient dynamic (waveform) data.

Communication: Data is transferred to the host software over an Ethernet link.

Mode switching: The configuration keylock is used to switch 3500 racks between "RUN" and "PROGRAM" modes, where the RUN mode prevents configuration modifications while allowing the rack to operate normally.

Other products