330180-50-00 Bently Nevada Proximitor sensor
About the 330180-50-00 Bently Nevada Proximitor sensor, the following is a summary of its detailed information:
I. Product overview
Model: 330180-50-00
Brand: Bently Nevada (Bentley Nevada)
Type: Proximitor (presensor), part of the 3300 XL series
Second, product characteristics
Installation method:
Supports compact rail mounting and traditional panel mounting. When installing the panel, the position of the mounting holes is the same as that of the previous four-hole 3300 front.
Both mounting substrates are electrically insulated and do not require a separate insulating board.
Radio interference resistance:
Strong anti-interference ability, even if installed in the glass fiber shield, it will not be interfered by nearby radio signals.
Measuring capability:
Both static (displacement) and dynamic (vibration) measurements can be made.
It is mainly used for vibration and displacement measurement of oil film bearing machinery, as well as key phase and speed measurement.
Interchangeability and compatibility:
All 3300 XL 8mm proximity sensor systems offer superior performance and support full interoperability of probe, extension cable and preprocessor sensors without the need to match or calibrate individual components.
Power Supply and Output:
Equipped with -24 Vdc power supply and 10 k load.
Output a voltage signal proportional to the distance between the probe end and the surface of the conductor under test.
3. Technical specifications
Linear range: Suitable for a wide range of displacement or vibration measurement needs.
Sensitivity: Under certain conditions (e.g. 100 Hz, 6000 cpm) the sensitivity is 20mV/mm/s (500 mV/in/s) ±5%.
Frequency response: Small operating frequency to 1 kHz (60,000 cpm), typical values from +0 to ±3dB.
Temperature range: The specific use temperature may vary depending on the application scenario, but it is generally suitable for industrial environments.
4. Application field
It is mainly used in vibration and position measurement of fluid film bearing machines, as well as bond phase reference and velocity measurement.
It can also be used for vibration and displacement monitoring in medical and health, environmental protection, agriculture, electronics, textile leather and other fields.
