IC698CPE020 GE CPU Module

The relevant information of IC698CPE020 GE CPU module can be summarized as follows:

1. Basic Information

Manufacturer: GE Automation

Series: PACSystems RX7i Series

2. Technical Specifications

Processor: 700MHz Pentium III floating-point microprocessor

Execution speed: 0.14 milliseconds per 1000 Boolean contacts

Memory: 10 megabytes of volatile memory (RAM) and 10 megabytes of flash memory (NVRAM)

Communication interface: three serial ports (including RS-232 and RS-485) and two Ethernet ports

Operating system support: VxWorks, Linux, etc. (depending on product version and configuration)

3. Functions and Features

Capable of real-time control of the machine and communication with other rack modules via a standard VME backplane.

Operation and control can be accomplished via a connected computer or onboard three-position switch.

Supports 512 program blocks, ladder diagrams, and C programming.

With symbolic variable support, the ability to modify test modes, and monitor system data over the network.

4. Physical parameters

Dimensions: about 130mm x 90mm x 40mm (may vary depending on the specific model)

Weight: about 0.5kg

Material: aluminum alloy

5. Installation and use

The MAC address of the device needs to be recorded during installation.

After turning off the rack power, insert IC698CPE020 in rack slot 1.

Connect the device to the Ethernet LAN and restore the rack power.

Connect the CMOS battery to support volatile memory.

6. Market and application

This module is widely used in the field of industrial automation, especially in application scenarios that require high-performance CPU control.

There may be different suppliers on the market to provide this module, and the price may vary depending on factors such as region, supplier and purchase quantity.

Related Products