GE FANUC IC695CMU310 Max-ON Hot Standby Redundant CPU Module
Delivery time 3 days
Product origin New/used
Email plcru@foxmail.com
Mobile/wechat /WhatsApp +86 18185397189
GE FANUC IC695CMU310 Max-ON hot standby redundant CPU module is a high-performan
GE FANUC IC695CMU310 Max-ON hot standby redundant CPU module is a high-performance controller with a variety of functions and features. The following is a detailed introduction to it:
Hardware configuration:
With up to 10 MB of battery-backed RAM as program storage, the battery pack helps maintain storage and memory even when the device is powered off.
Equipped with 10 MB of non-volatile flash user memory.
Provides 2 embedded serial communication ports, namely RS-232 serial communication port and RS-485 serial communication port, both of which face the front of the chassis for easy use.
There is a three-position switch to control the operation of the CPU, as well as an LED indicator for status updates.
Performance parameters:
The typical Boolean execution speed is 0.195 milliseconds per 100 Boolean contacts or coils, showing excellent response speed.
Supports up to 512 program blocks, with a maximum size of 128 KB per program block.
Electrically compliant with PCI 2.2 standards to meet industrial requirements.
Software Support:
Supports three different serial protocols (Modbus RTU Slave, SNP, and Serial I/O) that all work with a programmable logic controller (PLC) to build the way the PLC provides information.
Use the SNP Slave protocol to communicate with HMI (Human Machine Interface) communication devices.
Supports ladder diagram, structured text, or function block diagram programming languages, and can even be programmed in C language.
Environmental adaptability:
Operating temperature range is 0 to 60 degrees Celsius.
Operates at a rated current of 1.25 amps and a rated voltage of 3.3 volts DC, while providing 1 amp at 5 volts DC.
System Connection:
The module must be connected with the RX3i Universal Backplane, Ethernet module, 90-30 series expansion backplane, PacSystems equipment, and Max-On software to build a complete RX3i system application.
Supports dual backplane bus architecture, which can be used for RX3i PCI and GE Fanuc series 90-30 serial bus.
